Home > Spare Parts Catalog > Mechanical Parts > Power Transmission > Pillow Block Bearings >

SealMaster MPD-51 Medium Duty Pillow Block Bearing

Sealmaster MPD-51 Medium Duty Pillow Block Bearing
Picture is for Reference Only
 
SealMaster MPD-51 Medium Duty Pillow Block Bearing
Our Price: $992.34

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: MPD-51
Qty:

Description Technical Specs
 

SealMaster MPD-51 Medium Duty Pillow Block Bearing, 3-3/16" Shaft, Set Screw Ball Bearing

The SealMaster MPD-51 Medium Duty Pillow Block Bearing is a medium duty set screw ball bearing.

Features & Benefits

  • Sealmaster mounted ball bearings with double set screw locking are available in a wide variety of features: 7/8" - 4 15/16", Standard and medium duty series
  • Double set screw locking incorporates extended inner races on both sides of the ball path resulting in a total of 4 set screws (2 on each side) for better load distribution, resulting in greater holding power when operating at high speeds and when vibration may be present.
  • Wide outer ring design provides increased grease capacity to lubricate the bearings.
  • Anti-rotation - pin & dimple system prevents the bearing OD from creep/rotation due to vibration over time while providing a full ± 2° of static misalignment.
  • Direct lube - pin & dimple system provides a direct lubrication path into the bearing, eliminating the need to channel grease around a lubrication groove common on standard mounted ball bearing units.
  • Felt labyrinth seal with rotating flinger directs contamination away from the sealing surfaces. Alternate seal options available upon request, see Sealmaster Custom Select for more information.
  • Black oxide standard on inner/outer rings and seal components inhibits corrosion.
  • Zone hardened inner race provides a fully hardened ball path while leaving the race extensions unhardened, allowing better set screw holding power.
  • Length through bore is longer than most competitors for greater shaft stability.
  • Land-riding brass retainer has high strength, minimizes friction and provides maximum grease circulation.
  • 120° balanced set screw position provides three-point balanced contact that minimizes vibration, reduces noise and improves reliability of the shaft assembly.
  • Precision manufactured, diamond faceted set screws improve clamping and resist backing out.
  • Solid base, pillow block, cast iron housing provides improved stability and resistance to shock and vibration.
  • Permanent metal nameplate allows for easy identification after years of operation.
  • Factory-filled with Sealmaster GOLDPLEX HP lithium complex NLGI 2 grease.

Industries

  • Aggregate
  • Grain
  • Foundries
  • Baggage
  • Wastewater treatment

Applications

  • Conveyors
  • Bucket elevators
  • Mining machinery

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Spare Parts Catalog > Mechanical Parts > Power Transmission > Pillow Block Bearings
Spare Parts Catalog > Mechanical Parts > Power Transmission
Spare Parts Catalog > Mechanical Parts
Spare Parts Catalog