Home > Spare Parts Catalog > Plumbing > CPVC Pipe Fitting > Quick Disconnect Couplings >

MEP QD300X150ASY Quick Disconnect, 3" Header, 1-1/2" Riser

MEP Quick Disconnect QD300X150ASY
Picture is for Reference Only
MEP QD300X150ASY Quick Disconnect
Our Price: $20.91
(Minimum order):  2

Availability:: Usually Ships in 1 to 2 Days
Product Code: QD300X150ASY


MEP QD300X150ASY Quick Disconnect, 3" Header, 1-1/2" Riser

The MEP QD300X150ASY Quick Disconnect is a 3" header x 1-1/2" riser quick disconnect, used commonly on industrial parts washers. Ease of installation and replacement allows both OEM's and end users to minimize costs of installing and replacing risers and/or multiple nozzles on a riser.

Qwik Disconnects - The “E-Z” way to attach nozzles to large pipe - drill a 1-1/2” hole & clamp on. Q.D.’s save time during installations; do not require welded couplings. Pressure capability (up to 50 psi).

Up-graded Spring Design:

  • More “wrap around” contact w/ pipe.
  • Holding distributed more evenly, two places instead of one.
  • Better snap fit.
  • Increased Spigot Depth Into Pipe:

  • Easier attachment to pipe.
  • Greater Choice of Seals:

  • Flat Seals
  • Thicker O-rings
  • A Seal With a Strong Shoulder:

  • Flat Seal provides greater surface area for sealing.
  • Available in Buna N, Hypalon and Viton™ materials.
  • Note: Flat Seals can not be used with 2” Q.D.’s
  • High Chemical Capabilities:

  • Springs are 304 Stainless Steel.
  • Q.D. bodies are Glass-filled Polypro.
  • Available for 2", 3" & 4" Pipe:

  • Select Any E-Z Spray standard nozzle tip or use an NPT female threaded ball in 1/8”, 1/4”, 3/8”, 1/2” for nozzle attachment of choice.
  • Advantages:

  • No tools for cleaning
  • Straight through solution flow
  • No welded couplings or street elbows
  • Swivel nozzle ball for spray direction
  • Applications:

  • Automotive side & bottom flood spray
  • Eductors in e-coat tanks
  • Any low pressure system where large flow rates are required
  • Suitable for pressures to 50 psi
  • Attaches to black iron, S.S. or plastic pipe
  • Qwik Disconnects Seal Selection:

  • Standard O Ring Seal (Thinnest Seal):
  • - Use with all Q. D.’s including 2"
  • Flat Seal (Thickest Seal):
  • - Use with 4", 3" and 2-1/2" Q. D.’s - Highest pressure capability - Do Not use with 2" Q. D.’s
  • Flat Seal:
  • - Available in Buna, Hypalon, & Viton
  • Q.D. O-Ring:
  • - Available in Buna, Hypalon, & Viton
  • Extra Thick O Ring Seal (Medium Seal):
  • - Use with 2" Q. D.’s where increased pressure is required. - Can be used with any other Q. D.

    Trade-Offs - Choosing the thickest seal increases the holding pressure capability of the spring clamp. However, while additional seal height or thickness may be desirable, this also diminishes the portion of the Q. D. which is actually inserted into the header which may cause slippage under certain conditions.

    Additionally, installation care is required to ensure the Qwik Disconnect is properly seated into the header hole. Furthermore, horizontal pipe sections longer than 21", from header centerline to end cap, require support.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Spare Parts Catalog > Plumbing > CPVC Pipe Fitting > Quick Disconnect Couplings
    Spare Parts Catalog > Plumbing > CPVC Pipe Fitting
    Spare Parts Catalog > Plumbing
    Spare Parts Catalog