Home > Spare Parts Catalog > Plumbing > CPVC Pipe Fitting > Quick Disconnect Couplings >

MEP QD250X125ASY Quick Disconnect, 2-1/2" Header, 1-1/4" Riser

MEP QD250X125ASY Quick Disconnect
Picture is for Reference Only
 
MEP QD250X125ASY Quick Disconnect
Our Price: $20.90
(Minimum order):  2

Availability:: Usually Ships in 1 to 2 Days
Product Code: QD250X125ASY
Qty:

Description
 

MEP QD250X125ASY Quick Disconnect, 2-1/2" Header, 1-1/4" Riser

The MEP QD250X125ASY Quick Disconnect is a 2-1/2" header x 1-1/4" riser quick disconnect, used commonly on industrial parts washers. Ease of installation and replacement allows both OEM's and end users to minimize costs of installing and replacing risers and/or multiple nozzles on a riser.

Qwik Disconnects - The “E-Z” way to attach nozzles to large pipe - drill a 1-1/2” hole & clamp on. Q.D.’s save time during installations; do not require welded couplings. Pressure capability (up to 50 psi).

Up-graded Spring Design:

  • More “wrap around” contact w/ pipe.
  • Holding distributed more evenly, two places instead of one.
  • Better snap fit.

Increased Spigot Depth Into Pipe:

  • Easier attachment to pipe.

Greater Choice of Seals:

  • Flat Seals
  • Thicker O-rings

A Seal With a Strong Shoulder:

  • Flat Seal provides greater surface area for sealing.
  • Available in Buna N, Hypalon and Viton™ materials.
  • Note: Flat Seals can not be used with 2” Q.D.’s

High Chemical Capabilities:

  • Springs are 304 Stainless Steel.
  • Q.D. bodies are Glass-filled Polypro.

Available for 2", 3" & 4" Pipe:

  • Select Any E-Z Spray standard nozzle tip or use an NPT female threaded ball in 1/8”, 1/4”, 3/8”, 1/2” for nozzle attachment of choice.

Advantages:

  • No tools for cleaning
  • Straight through solution flow
  • No welded couplings or street elbows
  • Swivel nozzle ball for spray direction

Applications:

  • Automotive side & bottom flood spray
  • Eductors in e-coat tanks
  • Any low pressure system where large flow rates are required
  • Suitable for pressures to 50 psi
  • Attaches to black iron, S.S. or plastic pipe

Qwik Disconnects Seal Selection:

  • Standard O Ring Seal (Thinnest Seal):
    • Use with all Q. D.’s including 2"
  • Flat Seal (Thickest Seal):
    • Use with 4", 3" and 2-1/2" Q. D.’s
    • Highest pressure capability
    • Do Not use with 2" Q. D.’s
  • Flat Seal:
    • Available in Buna, Hypalon, & Viton
  • Q.D. O-Ring:
    • Available in Buna, Hypalon, & Viton
  • Extra Thick O Ring Seal (Medium Seal):
    • Use with 2" Q. D.’s where increased pressure is required.
    • Can be used with any other Q. D.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Spare Parts Catalog > Plumbing > CPVC Pipe Fitting > Quick Disconnect Couplings
Spare Parts Catalog > Plumbing > CPVC Pipe Fitting
Spare Parts Catalog > Plumbing
Spare Parts Catalog