Brixon 94PSS #94 Latch Body and Strike, Stainless Steel
The Brixon 94PSS #94 Latch Body and Strike is available with high quality, handsomely restyled, stainless steel housings
and handles. Stainless steel internal parts are standard. The Model 84 and 94 provides the same pressure release range as our original iron latch Model 4.
This industrial oven door latch is often used as a explosion relief latch or as a spring relief latch on industrial oven doors. Brixon is a great choice for door latches because they offer the widest pressure release range of any Factory Mutual (FM) approved explosion venting latch manufacturer, from as low as .01 PSI to pressure in excess of 3,000 pounds per door (using multiple latches). In addition to reliability and convenience, Brixon latches are designed to allow for installation from flush to well over 1 " offsets.
Casting Finish Options: Standard Investment Cast Finish, Electropolished, Polished/Buffed/Passivated.
Release Force Range: Adjustable: 58-285 lbs. (26.3-129.3 kg)
Handle Options: Available for right-hand or left-hand side of body. Please specify #94-RH or #94-LH
- #84 & #94P Body only 3.73 lb. (1.69 kg).
- #84 & #94H Body and handle only 4.86 lb. (2.21 kg)
- #84 & #94P Body & Strike Length: 8.39 in. (213 mm) Height: 2.50 in (63.5 mm)
- #84 & #94H Body, Handle & Strike Length: 9.53 in. (242 mm) Height: 3.50 in (89.0 mm)
- #84 & #94P Body only Length: 7.36 in. (187 mm) Height: 2.50 in (63.5 mm)
- #84 & #94H Body & Handle only Length: 8.50 in. (216 mm) Height: 3.50 in (89.0 mm)
Housing Materials: Body, Strike, Handle & Shim Castings: CF-8M (316) Stainless Steel.
Internal Parts: Coil Spring: PH 17-7 Chromium-Nickel Stainless Steel. Ball Pin: 416 Stainless Steel (Hardened and Passivated). Cam, Nut, Rivets & Washers: 304 Stainless Steel. Roller, Strike Pin, Set Screw, Cross-Pin & Body Pin: 303 Stainless Steel. E-Clips: PH 15-7 Mo Stainless Steel. Handle Torsion Spring: 302 Stainless Steel Spring Wire.
Mounting: Use 3/8” (Grade 8) or 10mm (Grade 8.8) bolts for mounting. 2 bolts required for strikes & shims, and 4 bolts for the latch body. Flat washers & lock washers are recommended.
Door-Doorjamb Offset: No shim required 0.000 - 0.197 in (0 - 5mm)