Brixon 93PSS #93 Latch Body and Strike, Stainless Steel
The Brixon 93PSS #93 Latch Body and Strike is available with high quality, handsomely restyled, stainless steel housings and handles. Stainless steel internal parts are standard. The Model 93 provides the same pressure release range as our original iron latch Model 3.
This industrial oven door latch is often used as a explosion relief latch or as a spring relief latch on industrial oven doors. Brixon is a great choice for door latches because they offer the widest pressure release range of any Factory Mutual (FM) approved explosion venting latch manufacturer, from as low as .01 PSI to pressure in excess of 3,000 pounds per door (using multiple latches). In addition to reliability and convenience, Brixon latches are designed to allow for installation from flush to well over 1 " offsets.
Housing Materials: CF 8M (316) Stainless Steel
Internal Parts: Coil Spring: PH 17-7 Chromium-Nickel Stainless Steel. Ball Pin: 416 Stainless Steel (Hardened and Passivated). Cam, Nut, Rivets & Washers: 304 Stainless Steel. Roller, Strike Pin, Set Screw, Cross-Pin & Body Pin: 303 Stainless Steel. E-Clips: PH 15-7 SS.
Handle Type: Right-Handed
Release Force Range: 43 - 180 lbs
Length: 6.97 in
Width: 2.5 in
Height: 3.86 in
Weight: 3.6 lbs
Release Force Range: 19.5 - 81.6 kg
Length: 17.7 cm
Width: 9.8 cm
Height: 6.35 cm
Weight: 1.63 kg
Mounting: Use 3/8" (Grade 8) or 10mm (Grade 10.9) bolts for mounting. 2 bolts required for strikes & shims. 4 bolts for latch body. Flat washers & lock washers are recommended.
Positive door offsets of up to 1.739" are easily accommodated with our 90 Series stainless steel shim.