Brixon 83PCS #83 Latch Body and Strike, Cast Steel
The Brixon 83PCS #83 Latch Body and Strike is available with high quality, handsomely restyled, stainless steel housings and handles. Stainless steel internal parts are standard. The Model 93 provides the same pressure release range as our original iron latch Model 3.
This industrial oven door latch is often used as a explosion relief latch or as a spring relief latch on industrial oven doors. Brixon is a great choice for door latches because they offer the widest pressure release range of any Factory Mutual (FM) approved explosion venting latch manufacturer, from as low as .01 PSI to pressure in excess of 3,000 pounds per door (using multiple latches). In addition to reliability and convenience, Brixon latches are designed to allow for installation from flush to well over 1 " offsets.
Housing Materials: Body, Strike & Handle 1045 Carbon Steel
Internal Parts: Ballpin & strike pin mild steel. Roller, cam, nut & adjusting screw are case-hardened steel. Spring is chrome silicon. Bearing pin is 303 stainless steel.
Strike Type: Regular Strike
Release Force Range: 43 - 180 lbs
Length: 6.97 in
Width: 3.86 in
Height: 2.5 in
Weight: 3.79 lbs
Release Force Range: 19.5 - 81.6 kg
Length: 17.7 cm
Width: 9.8 cm
Height: 6.35 cm
Weight: 1.71 kg
Mounting: Use 3/8" (Grade 8) or 10mm (Grade 10.9) bolts for mounting. 2 bolts required for strikes & shims. 4 bolts for latch body. Flat washers & lock washers are recommended.
Offset Mounting: (0-.15") use Reg Strike; (.151"-.680")&(.839"-1.05") use Adj Strike; (1.05"-1.43") use Tall Strike; (.681"-.838") & (>1.43") use Reg Strike with 943 series shims