Spraying Systems 46500A-1-PP clip on nozzle body, 1"
The Spraying Systems 46500A-1-PP "K-ball" clamp-on nozzle with ProMax QuickJet nozzle socket. Constructed of durable polypropylene, these nozzle adapters clamp onto a standard 1" schedule 40 or 80 pipe riser, and utilize a 9/16" hole for fluid passage.
The nozzle comes equipped with a a single bail for clamping to the riser, on systems operating at up to 60 psi. The adjustable "K-ball" design allow the user to a aim the nozzles to meet the application's requirements. A variety of QuickJet nozzles can be utilized depending on the application, inlcuding VeeJet flat spray nozzles, FullJet full cone nozzles (including wide angle), and WhirlJet hollow cone nozzles (including wide angle).
Note: This is the clamp body only. Spray tips should be specified and ordered separately. Reference QPTA, QPHA, & QPAA series nozzle tips.
