Contact us


  Home > Spare Parts Catalog > Combustion Parts > Burners > Maxon Burners >

  Maxon 0.5 APX Burner

Maxon 0.5 APX Burner
Picture is for Reference Only
 
Maxon 0.5 APX Burner
Our Price: $1,478.56

Availability:: Usually Ships in 2 to 4 Weeks
Product Code: APX05PL
Qty:

Description Technical Specs
 

Maxon 0.5 APX Burner, 6" - 500,000 Btu/hr, Pilot, Continuous Flange Burner Mounting

The Maxon 0.5 APX Burner, 6" - 500,000 Btu/hr is a 0.5 ft - 500,000 Btu/hr excess air fired, natural gas line style burner used commonly in industrial ovens. Comes equipped with integral 1/12 HP combustion blower.

The Maxon APX burner is a great choice for process heating ovens, due to its ease of mounting in a flashed oven opening. Requires no additional mounting brackets, etc.

General Features
  • Nozzle-mixing line burner for use with low pressure natural gas, propane and butane.
  • Eliminates leakage with its single-piece, aluminium extrusion body design.
  • Cooler oven walls due to deeper penetration inside the oven (wall-mounted applications)
  • Independent of variable process air-flows (in-duct applications)
  • Corrosion resistant main gas/air body and durable stainless steel mixing plates
  • Up to 40:1 turndown
  • Up to 400 kW per foot
  • Packaged units up to 15 ft in length (1 ft = 305 mm)

The particular drilling pattern of the air/gas-mixing body provides increased turbulence as well as uniform air distribution across the entire burner-length. This results in better gas/air mixing, shorter flames, more resistance to cross-flows and much lower emissions.

The design of the APX burner allows for high turndown without premixing fuel and air at low firing rates. Low emissions are maintained through precise aeration of the flame along its length. This progressive aeration of the flame is achieved with the advanced mixing plate design of MAXON NP AIRFLO Line buner.

The APX burner is built in 2 main versions, both available in lengths of 0.5 ft up to 15 ft (1ft = 305 mm):

  • A wall-mounted APX burner to be externally mounted on oven- or dryer walls. With a flame that exits the mixing chamber more than 150 mm downstream from the burner mounting flange, it is possible to penetrate oven panels up to 150 mm thickness without risking damage to oven structure from flame impingement.
  • An in-duct APX burner to heat-up low temperature process air flows.
  • For both versions, you can choose between the standard APX burner with 1 or more gas- and air inlet connections on the back of the burner, depending on the burner length.
  • The packaged APX burnerequipped with one or more low horse-power paddle wheel fans, which resist possible particle build-up and provide higher air pressures.
  • Additionally, the APX in-duct burner is also available as a "slide-in-unit", with a mounting plug or plate which can be easily flanged onto the duct.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Spare Parts Catalog > Combustion Parts > Burners > Maxon Burners
Spare Parts Catalog > Combustion Parts > Burners
Spare Parts Catalog > Combustion Parts
Spare Parts Catalog