LAX Engineered Solutions, LLC

1.     DESIGN SECIFICATIONS

Product Data:

Product Description: Copper/Brass Heat Exchangers

Product Dimensions: Maximum 70” long x 70” wide

Design Thickness: 9” high (Door opening = 19” clear)

Product Weight: 600 lbs. (maximum for copper/brass/steel core)

Product Configuration: Horizontally on flat cart

Production Rate: 5 – 15 cycles/hour including load/unload time

Flux/Water Load: Variable (Excess solution to be blown off)

 Process Information:

Design Operating Temp: 625º F Leaded solder (700º F Unleaded)

Maximum Operating Temp: 750º F

Dwell Time in oven: 3-12 Minute dependent on row configuration and weight

Oven Construction:

Construction Type: Tongue & Groove panel construction

Interior Skin: 316 Stainless Steel

Exterior Skin: Aluminized Steel (316 SS front face and door)

Insulation: 5” 8 PCF semi-rigid

Interior Structure: 316 Stainless steel

 Exterior Oven Structure: Mild steel

Air Management:

Recirculation Airflow: 43,300 CFM

Recirculation Motor: 40 HP

Exhaust Airflow: 4,000 CFM

Exhaust Motor: 7 ½ HP 

Heat Management:

Connected Load: 2,400,000 Btu/hr Natural Gas

Powered Cart:

Cart Drive: 1 ½ HP

Required Utilities:

Electrical Service: 480 volt, 3 phase, 60 Hz

Control Voltage: 120 volt, 1 phase, 60 Hz

Full Load Amps: 100 Amp Main disconnect (76 Amp connected load)

Heat Source: Natural Gas rated at 1,000 Btu/ft³ @ 1 PSI

Compressed Air: 80 PSI (Filter/Regulator/Lubricator provided)

Equipment Dimensions:

Overall Dimensions: 27’-3” long x 10’-6” wide (Without optional cooler)

x 10’-3” high (Exhaust stack outlet)